Filter
Top Products
Chapter 2 - Installation
Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419C) 21
Country Configuration with Global Wizard
Different countries have different requirements for how modems must function. Therefore, before you use
your modem, you must configure it to match the defaults of the country in which you are using it. You can
use one of two configuration methods:
•
Using the Global Wizard to Configure Your Modem
•
Using AT Commands to Configure Your Modem
Using the Global Wizard to Configure Your Modem
The Global Wizard configuration utility is recommended for computers running Windows Server 2008, Vista,
XP, and 2003. The Global Wizard can configure your modem for a specific country with just a few mouse
clicks.
1.
Insert the MultiModem USB CD into the CD-ROM drive. The
Autorun
dialog box appears.
2.
Click
Initial Setup and Country Selection
.
3.
Choose either:
•
Run Global Wizard from CD.
This will not load the wizard onto your hard drive, or
•
Install Global Wizard on the HD
. This will install the wizard onto your hard drive for future use.
4.
The
Global Wizard
dialog box appears. Click
Next
.
5.
The Global Wizard searches for your modem and identifies it. Click
Next
.
6.
Select the country in which the modem will be used and then click
Next
.
7.
Review your choice of country. If it is correct, click
Next
to configure the modem.
8.
When Global Wizard announces that the parameters have been set, click
Finish
to exit.
Using AT Commands to Configure Your Modem
Non-Windows users can configure the modem using AT commands. You must enter these commands in
your communication program’s terminal window.
1.
Run your favorite communication program and open the program’s terminal window.
2.
To configure the modem for a specific country, type
AT%T19,0,
nn
, where
nn
is the country code in
hexadecimal format, and then press E
NTER
. The message
OK
displays.
3.
To verify the change, type
ATI9
, and then press E
NTER
.
The country/region code displays:
Example Country/Region AT command Country code
(hexadecimal) (decimal)
Euro/NAM AT%T19,0,34 (default) 52
The complete list of country/region codes can be found on the Multi-Tech Web site at
http://www.multitech.com/PRODUCTS/Categories/Modems/global/configuration.asp#chart
Then click on global modems. The Global Modem Country Approvals page displays. On this page you can
view approvals, configuration strings and responses by country and product.