Filter
Top Products
Appendix D – Linux Installations
Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419C) 39
Prepare the Kernel Sources
This step may or may not be necessary, depending on how your Linux distribution installs the kernel sources.
Log in as root and do the following:
Command Explanation
1. cd /usr/src/linux-<version> Change to the source directory.
2. make mrproper Clean up any old files.
3. Use either of these commands:
make oldconfig
-OR-
make cloneconfig
Make a configuration file to match your running
kernel.
for Red Hat
for SUSE
For other distributions these same commands
might work, or you might need to find a config
file in /boot or in a configs directory, copy it to
.config, and run "make oldconfig".
4. make prepare To prepare the kernel sources for your
machine.
If you have built your own kernel, the kernel sources will already be installed and prepared. If you are using a kernel that
came with a Linux distribution, it can sometimes be difficult to get the kernel sources correctly installed and prepared,
since each Linux distribution handles kernel sources slightly differently.
For example, if you get errors about the wrong kernel version, you may have installed the wrong kernel sources, or you
may need to edit the kernel version in the top level Makefile of the kernel sources. If you get errors about a missing usb-
serial.h, you may only have the kernel headers installed. If you have trouble getting the full kernel sources installed and
prepared, you can copy the correct version of usb-serial.h to drivers/usb/serial in the kernel headers directory and then
the other kernel sources are not needed.
If you have difficulties, look carefully at the error messages when installing the TGZ or RPM packages. Those messages
should give you an indication of just what the error is.