2-2. Connecting the eClient 620L
NOTE
Before connecting the eClient 620L, confirm the following:
- The eClient 620L is turned off.
- The WTS is turned on.
• Connect the peripherals to the appropriate connectors of the unit.
1. In case of connecting the WTS through LAN:
Connect the eClient 620L to the network with an Ethernet cable.
In case of a dial-up or dial-in connection:
Connect the eClient 620L to a modem or a modem card.
2. Plug a keyboard and a mouse into the eClient 620L. (Plug a mouse
into the keyboard if the keyboard has a USB port.)
3. If using other devices, please connect them to the appropriate
connectors.
4. Plug the power cord into the power connector.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
10 2. CONNECTING THE eClient 620L