E
17
2 SCREEN ADJUSTMENT
This monitor provides signal filter adjustments according
to the characteristics of each graphics board for
displaying the image properly. If the characteristics of the
graphics board does not match those of the monitor, the
characters and images displayed may have a slight
shadow on their right side (refer to figure on the left). If
these phenomenon is noticeable, use the “Signal Filter”
function. Select from mode 1 or mode 2, whichever
displays the image better.
Signal Filter
Function
adjusts: Video Level
Set the video level to adapt the output level of the
computer or the graphics board.
Video Level
Set-up Procedure
1)Select the “Off Timer” icon. Select “Enable” and press the enter key.
2)Press the right/left key to adjust how long (0 to 23 hours) the monitor should
be in the “On Period”. Choosing 0 disables the “Off Timer”.
Advance notice (LED flashing green) will be given 15 minutes before the monitor
automatically enters the “Off Timer Mode”.
To Delay Entering the “Off Timer Mode”
To delay entering the “Off Timer Mode”, press any keys on the front panel
located to the left of the power switch during the “Advance notice Mode”. The
monitor will continue to operate for an additional 90 minutes. There will be
another advance notice for 15 minutes as described. Delayed entrance into the
“Off Timer Mode” can be extended as many times as desired.
What is Off Timer?
The Off Timer function allows the user to set the time
in which the monitor will be in operation, called the
“On Period” and automatically shifts the operation into
the “Off Timer Mode” when the set “On Period”
expires. The energy consumption of the monitor in the
“Off Timer Mode” is as low as the one of the monitor
in “PowerManager Mode 2” although no setting PC to
operate the Off Timer function is required.
Off Timer
Function
Menu
Position
adjusts: Menu Position