22
3 TROUBLESHOOTING
Explanation of the Characteristics of CRTs
When the monitor is not fully warmed up, the screen may look slightly colored, e.g.
reddish or bluish. This phenomenon is due to the unstableness of the electron gun during
its warm-up period. Please wait for about 30 minutes until the monitor stabilizes in order
to gain its proper color.
Problems
16)• Control Pad “ENTER
key” does not operate.
• AUTO-SIZING button
does not operate.
Points to check with possible solutions
The Adjustment Lock is probably on. To unlock:
switch off the monitor power, then hold down the down
arrow key of the control pad and switch the monitor
back on. See page 18.