Filter
Top Products
E
19
2 USING THE SCREENMANAGER
• Allow the LCD monitor to warm up for at least 20 minutes before making
adjustments.
• For maximum viewing comfort, it is suggested that the monitor be tilted to
eye level.
• To make adjustment easily, install and run the “Screen Adjustment
Program” in the attached utility disk. Before adjustment, read the
“readme.txt” file.
• Do not continuously press the Control buttons (up, down, right and left
buttons) on the front panel, as the adjustment value will change quickly
and make it difficult to locate the most suitable adjustment point.
Procedure
Please adjust the screen using the following procedure.
(1)Having read the “readme.txt” file, install and run the “Screen
Adjustment Program” in the utility disk.
Step by step adjustment is provided by the wizard guide. Follow the
wizard or the procedures (2) to (7) below.
• If the user's operation system has no utility disk (e.g. OS/2), we
recommend setting the desktop pattern to that as shown in the
diagram below.
(2) Auto Adjustment
Push the Auto adjustment button on the front panel. The following
message will appear and remain on the screen for 5 seconds. While
the message is on the screen, push the button again to automatically
adjust the screen position. If you do not wish to do adjust the screen,
do not push the button again. The message will disappear.
• The Auto adjustment function is intended for use on Macintosh and
PCs running Windows. It may not function properly if any of the
following applies:
Every-other-dot pattern