Filter
Top Products
E
31
3 TROUBLESHOOTING
Problems
9) The screen has defective
pixels (e.g. slightly light or
dark).
T
Others
Problems
1) The utility disk is unable to be
opened (for Macintosh only).
2) • The Enter button does not
operate.
• The Auto adjustment
button does not operate.
3) The Auto adjustment button
does not work properly.
4) Frequency does not change
after installing “Monitor
information file” in the
attached utility disk on
Windows 95/98/2000.
Points to check with possible solutions
This is due to the characteristics of the panel itself,
and not the LCD product.
Points to check with possible solutions
Some PCs without PC-Exchange do not allow the
utility disk to be opened. Please set the desktop
pattern to ever-other-dot before adjustment. See
page 19.
The adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while pressing
the Auto adjustment button switch the power on.
See page 17.
The Auto adjustment function is intended for use
on Macintosh and IBM compatibles PCs running
Windows. It may not work properly if either of
the following applies.
- You are running an AT-compatible PC on MS-
DOS (not Windows).
- The background color for the “wallpaper” or
“desktop” pattern is set to black.
Some signals from the graphics boards may not
function properly. Follow the adjustment
procedure on page 18, adjust step by step using
the “Screen” menu.
Use the graphics board’s utility software to change
the input signal frequency.