Filter
Top Products
5. MAKING USE OF USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily
connected.
Required system environment
● PC equipped with USB ports or another USB hub connected to the USB compliant PC
● Windows 98/2000/Me/XP // Mac OS 8.5.1 or later
● USB Cable (MD-C93, enclosed)
● The USB hub function may not work properly depending on the PC or peripherals.
Please consult the manufacturer of each device about the USB support.
● Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
● When the monitor is not on, the peripherals connected to the downstream ports will not operate.
● Even if the monitor is in a power saving mode, the devices connected to the monitor's USB ports (both
the upstream and the downstream) will function.
● The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
1. Connect the monitor to the PC with the signal cable first, then turn on the PC.
2. Connect the upstream port of the monitor to the downstream port of the USB
compliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3. After setting up, the monitor's USB hub is available for connecting USB compliant
peripherals to the downstream ports of the monitor.