Filter
Top Products
panel.
● Whenever an error signal message appears, the signal frequency
will be displayed in red.
(Example)
● Use the graphics board's utility
software to change the
frequency setting. (Refer to the
manual of the graphics board.)
3. Display position is incorrect.
● Adjust the image position using
the <Position> .
● If the problem persists, use the
graphics board's utility software
to change the display position if
available.
4. Screen image is smaller or larger than the actual screen
images.
● Adjust the resolution using the
<Resolution>.
5. Vertical bars of distortion appear.
● Decrease the vertical bars using
the <Clock> .
6. The characters and images have several vertical bars on
their right side.
● If using the monitor in the
analog input signal, try setting
the Gamma value from 1.8 to
2.2.
7. Horizontal bars of distortion appear.
● Decrease the horizontal bars
using the <Phase>.
8. Letters and lines appear blurred.
● Adjust the blurred lines using
<Smoothing>.
9. Distortion appears like the figure below.
● This happens when both
composite (X-OR) input signal
and separate vertical
synchronizing signal are input.
Please select one of the two.