Filter
Top Products
18. The Auto adjustment switch does not operate.
● Check that there is nothing left
on the face of Auto Adjustment
switch. Wipe the control panel,
and then touch the Auto
Adjustment switch again with
dry finger.
● The adjustment lock is probably
on. To unlock: turn the LCD
monitor off. Then, while
touching the Auto Adjustment
Switch, turn the power on.
19. Frequency does not change after installing "Monitor
information file" in the attached utility disk on Windows
98/2000/Me/XP.
● Use the graphics board's utility
software to change the input
signal frequency.
20. PC is hung up. / The peripherals connected to the
downstream ports do not operate.
● Check that the USB cable is
correctly connected.
● Check the downstream ports by
connecting the peripherals to
other downstream ports. If the
problem is solved by doing this,
contact an EIZO dealer. (For
details, refer to the manual of
the PC.)
● Try executing the following
method.
● Restarting the PC
● Connecting the PC and
peripherals directly
If the problem is solved by
doing this, contact an EIZO
dealer.
21. USB function cannot be setup.
● Check that the USB cable is
correctly connected.
● Check that the PC and OS are
USB compliant. (For
verification of USB support,
consult the manufacturer of
each system.)
● Check the PC's BIOS setting
for USB. (For details, refer to
the manual of the PC.)