Filter
Top Products
English
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(MD-C87 enclosed)
D-Sub
mini
15 pin
Analog
DVI-I Input Connector
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
PC 1
16 2. CABLE CONNECTION
NOTE
• When using FD-C16, plug the D-Sub mini 15 pin connector to the computer and
DVI-I connector to the monitor.Wrong connection causes no picture problem.
Selecting the Active Input
The Input Signal Selection Button on the control panel can be used to select either
SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the button is
pressed, the input changes. When switching the signal, the kind of the input signal
(Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of
the screen.
ENTER
AUTO
SIGNAL
1 - 2
PC 2
(Ex.1)Analog
(Ex.2)DigitalDVISignal Cable
(FD-C39 enclosed)
Signal Cable
(MD-C87 enclosed)
D-Sub
mini
15 pin
Analog
(SIGNAL 1)
Input Signal Selection Button
D-Sub 15 pin mini
Input Connector
(
SIGNAL 2
)