National Instruments 1191 Switch User Manual


 
Chapter 1 Installing and Configuring the SCXI-119X
© National Instruments Corporation 1-7 SCXI-1190/1191/1192 User Manual
To connect the chassis to a DAQ device, complete the following steps while
referring to Figure 1-2:
Figure 1-2. ConnectinganSCXIChassistoaDAQDevice
or Computer-Based Instrument
1. Power off both the SCXI chassis and the computer that contains the
DAQ device or computer-based instrument.
2. Insert the cable adapter into the back of the SCXI chassis aligned with
the module that is to be connected to the DAQ device or
computer-based instrument. See your cable assembly installation
guide for more specific information.
3. Connect the cable to the back of the cable adapter, ensuring that the
cable fits securely.
4. Connect the other end of the cable to the DAQ device or
computer-based instrument that you will use to control the SCXI
system.
1 SCXI Chassis Power Switch
2 Cable Adapter
3 Cable
4 DAQ Device or Computer-Based Instrument
®
2
3
4
1