Filter
Top Products
Chapter 2 Installation and Verification
© National Instruments Corporation 2-5 PCI Serial for Windows Me/9x
Verify the Installation
Before you verify the installation, keep in mind that the serial ports
built into your computer are typically named from COM1 to COM4.
Windows Me/9x typically issues port names to the ports on NI serial
hardware starting with COM5, COM6, and so on. If not enough resources
are available to assign to all the NI serial ports, the port with the higher
COMx name is not configured.
To verify the hardware and software installation, complete the following
steps:
1. Select Start»Settings»Control Panel and double-click on the
System
icon.
2. Click on the
Device Manager
tab and click on the
View devices by
type
button.
3. Double-click on the
Ports (COM & LPT)
icon to display all of
the ports.
4. Double-click on the Multi-function adapters icon.
The PCI serial boards are configured as devices belonging to the
multi-function adapters class. The multi-function parent device is
listed under the Multi-function adapters icon, and each child device
is listed as a port under the Ports
(COM & LPT)
icon.