Filter
Top Products
Appendix C Troubleshooting and Common Questions
© National Instruments Corporation C-5 PCI Serial for Windows Me/9x
5. Select the interface that Windows Me/9x did not detect, as shown in
Figure C-1.
Figure C-1.
Ports List in Device Manager
6. Click on the Remove button.
7. Click on the OK button to remove the serial hardware information.
8. Repeat steps 5 through 7 until you have removed all serial interfaces.
9. Click on the Refresh button.
10. Windows Me/9x should automatically detect your hardware and
display one or more
New Hardware Found
dialog boxes. Your
operating system (Windows Me/9x) may show the
Windows Default
Driver
option. If so, make sure the
Windows Default Driver
is
selected and click on the
OK
button. If the
Windows Default Driver
option is not shown, the installation continues automatically.