National Instruments CAN Hardware Computer Hardware User Manual


 
Chapter 2 Installation and Configuration
Getting Started with CAN for Windows NT 2-8
©
National Instruments Corporation
Figure 2-7.
NI-CAN Settings for the PCI-CAN/2
Each port of the CAN hardware interface is configured from this tab. Use
the drop-down box nearest the top of the tab to select the physical port
number to configure. For each port, use the
Name drop-down box to select
the name for the CAN Network Interface Object (
CAN0, CAN1, and so on).
You use this name to refer to the physical port from within your NI-CAN
application.
To access online help for the NI-CAN Configuration utility, click on the
Help
button. Alternately, you can right-click on a specific control and
select
What’s This?
from the pop-up menu to see context-sensitive help
for the item you have clicked on.
When you have finished configuring the NI-CAN software, proceed to
Chapter 3, Verify the Installation.
Note If you changed the resources for any PCMCIA-CAN or PCMCIA-CAN/2
interface, you must restart Windows NT for the changes to take effect.