Filter
Top Products
Chapter 3 Verify the Installation
Getting Started with CAN for Windows NT 3-2
©
National Instruments Corporation
Figure 3-1.
NI-CAN Diagnostic Utility after Testing
You can get details about any tested CAN interface by selecting the
interface and clicking on the Details button. For each failed CAN interface,
select it and click on the Details button to get a description of the failure.
Use that information and the information in Appendix C, Troubleshooting
and Common Questions, to troubleshoot the problem. Troubleshooting
information is also available in the online help for the NI-CAN Diagnostic
utility, which you can access by clicking on the Help button.