Filter
Top Products
Chapter 2 Installation and Configuration
NI PXI-8183 User Manual 2-12 ni.com
System CMOS
The NI PXI-8183 contains a backed-up memory used to store
BIOS configuration information.
Complete the following steps to clear the CMOS contents:
1. Power off the chassis.
2. Remove the controller from the chassis.
3. Move the jumper on J1 from pins 1–2 to pins 2–3, as shown in
Figure 2-3.
Caution Do not leave the jumper on pins 2–3. Doing so decreases battery life.
4. Wait one second. Move the jumper back to pins 1–2.
5. Reinstall the controller in the chassis.
Figure 2-3. Clearing the CMOS Contents (NI PXI-8183 Shown)
1Normal Operation (Default) 2Clear CMOS Contents 3 Pin 1
1
2
3