Filter
Top Products
© National Instruments Corporation B-1 PXI-846x and NI-CAN for Windows NT
B
Cabling Requirements for
PXI-8460 Low-Speed CAN
This appendix describes the cabling requirements for the PXI-8460
hardware.
Cables should be constructed to meet these requirements, as well as the
requirements of the other CAN devices in the network.
Connector Pinouts
The PXI-8460 has DB-9 D-Sub connector(s). The 9-pin D-Sub follows the
pinout recommended by CiA DS 102. Figure B-1 shows the pinout for this
connector.
Figure B-1. Pinout for 9-Pin D-Sub Connector
1 2345
6
789
No Connection
CAN_L
V–
No Connection
Optional Ground (V–)
CAN_H
No Connection
V+
Shield