Filter
Top Products
© National Instruments Corporation F-1 PXI-846x and NI-CAN for Windows NT
F
Troubleshooting and
Common Questions
This appendix describes how to troubleshoot problems and answers some
common questions.
Missing Board in the NI-CAN Configuration Utility
The NI-CAN Configuration utility contains configuration information for
all of the CAN hardware it is aware of that is installed in your system. To
start the NI-CAN Configuration utility, double-click on the NI-CAN
Configuration icon in the Control Panel:
• Windows NT 3.51—Open the Control Panel in the Main group of
the Program Manager.
• Windows NT 4.0 or later—Select Start»Settings»Control Panel.
If your board is not listed under NI-CAN Configuration, the board is not
properly installed. For the PXI-8460, PXI-8461, and PXI-8462, this means
that the board is not physically present in the system. If your board is firmly
plugged into its slot and the problem persists, contact National Instruments.
Diagnostic Utility Failures
The following sections explain common error messages generated by the
NI-CAN Diagnostic utility.
Resource Errors
This error occurs if the memory resource or interrupt resource assigned
to a board conflicts with the resources being used by other hardware in
the system. If a resource error occurs, click on the Resources button in
the NI-CAN Configuration utility to view the board resources. For the
PXI-8460, PXI-8461, and PXI-8462, if legacy hardware in your system
is using the resources, change the resource configuration of the legacy
hardware. If you need help, refer to the documentation that came with
your hardware. If the problem persists, contact National Instruments.