National Instruments SCXI-1190/1191 Switch User Manual


 
Chapter 2 Using the SCXI-119X
SCXI-1190/1191 User Manual 2-4 www.ni.com
Connecting Signals
The SCXI-1190 has push-on SMB connectors, and the SCXI-1191 has
screw-on SMA connectors as shown in Figure 2-2.
Figure 2-2.
SCXI-1190 SMB Connectors, SCXI-1191 SMA Connectors
Note
The power-up and reset state of the different multiplexer banks are as follows: banks
A and C, channel 0 is connected to the COM terminal; banks B and D, channel 3 is
connected is connected to the COM terminal.
N ATION AL
IN STRUMEN TS
N ATION AL
IN STRUMEN TS