Filter
Top Products
2-21
(2) Status LED 1 of both PCI modules are red
PCI#1 PCI#2
Status
LED 2
DISK
Access
LED
Status
LED 2
DISK
Access
LED
Description Action
Off Off Off Off On standby (AC power
is supplied through the
cord, but the system
has not been powered
on yet.)
After turning on the power,
wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal. If they do not get
back to normal, remount the
PCI module.
If the problem persists,
contact your sales agent.
Green Off Off Off The PCI module 1 is
performing diagnosis
(Diag).
Wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal.
Off Off Green Off The PCI module 2 is
performing diagnosis
(Diag).
Wait for the OS to start. When
the OS starts and duplex
mode is established, the
indications will return to
normal.
(3) Status LED 1 of only PCI module 1 is red
PCI#1 PCI#2
Status
LED 2
DISK
Access
LED
Status
LED 2
DISK
Access
LED
Description Action
Off Off Amber Amber The PCI module 1 is on
standby (The PCI
module 1 has not been
powered on yet.)
The PCI module 2
operates in simplex
mode.
Start the PCI module 1 from ft
server utility (See Chapter 5).
Remount the PCI module 1.
If the problem persists,
contact your sales agent.
Green Off Amber Amber The PCI module 1 is
performing diagnosis
(Diag).
The PCI module 2
operates in simplex
mode.
Wait for the PCI module 1 to
start. When the PCI module 1
starts and duplex mode is
established, the indications
will return to normal.
Off Off Off Off Only the PCI module 1
is on standby (AC
power is supplied
through the cord, but
the system has not
been powered on yet.)
AC power is not
supplied to the PCI
module 2.
Check if the power cord is
connected correctly.
Check the condition of
breaker and UPS.
Check if the power unit is
connected correctly.
Remount the PCI module 2.
If the problem persists,
contact your sales agent.