User’s Manual U14337EJ1V0UM00
5
INTRODUCTION
Target Readers
This manual is intended for users who design and develop application systems using
the V850/SV1™.
Purpose
The purpose of this manual is to describe the proper operation of the IE-703040-MC-
EM1 and its basic specifications.
Organization
This manual is divided into the following parts.
• Overview
• Names and functions of components
• Cautions
How to Read This Manual
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
The IE-703040-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator.
This manual explains the basic setup procedure and switch settings of the IE-
703002-MC when it is connected to the IE-703040-MC-EM1. For the names and
functions of parts, and the connection of elements, refer to the
IE-703002-MC User’s
Manual (U11595E)
.
To learn about the basic specifications and operation methods
→
Read this manual in the order of the
CONTENTS
.
To learn the operation methods and command functions, etc., of the IE-703002-MC
and IE-703040-MC-EM1
→
Read the user’s manual of the debugger (sold separately) that is used.
Conventions
Note: Footnote for item marked with
Note
in the text
Caution: Information requiring particular attention
Remark: Supplementary information
Numeral representation: Binary
…
xxxx or xxxxB
Decimal
…
xxxx
Hexadecimal
…
xxxxH
Prefix indicating the power of 2 (address space, memory capacity):
K (kilo): 2
10
= 1024
M (mega): 2
20
= 1024
2
Terminology
The meanings of terms used in this manual are listed below.
Target device The device that is targeted for emulation.
Target system The system (user-built system) that is targeted for debugging. This
includes the target program and user-configured hardware.