Filter
Top Products
22
Other Functions
z
The MTS button is used only when using the TV channel selector.
Stereo and SAP (2nd Audio program) sound program
When a bilingual program is received, the sound mode display appears as shown on the right.
Press the MTS button to select the sound to be heard.
Each time the button is pressed, Stereo, SAP or Mono appears on the screen.
TV
CHANNEL:10 STEREO
TV
CHANNEL:10 MONO
TV
CHANNEL:10 SAP
Mono and SAP (2nd Audio program) sound program
When a program is received, the sound mode display will appear as shown on the right,
and you can press the MTS button to select between SAP and mono sound.
Each time the button is pressed, SAP or Mono will appear on the screen.
TV
CHANNEL:10 SAP
TV
CHANNEL:10 MONO
Monaural sound
When a monaural program is received, the sound mode display will be shown. You can press the MTS button to manually select monaural Sound.
NOTES
z
If the sound signal is not strong enough, press the MTS button until Mono appears on the screen, to receive a clear mono sound.
z
If the sound has a hiss noise or keeps switching between stereo and mono mode or SAP and mono mode due to signal strength, press the MTS button until
Mono appears on the screen to receive a clear mono sound.
Stereo sound
When a stereo program is received, the sound mode display will be shown.
You can press the MTS button to select the sound mode for stereo or mono reception.
PIP:RGB1 VGA
MAIN:TV1
CHANNEL:10 STEREO
TV
CHANNEL:10 SAP
OpOp
OpOp
Op
ee
ee
e
rr
rr
r
atat
atat
at
ing Insing Ins
ing Insing Ins
ing Ins
tructruc
tructruc
truc
tt
tt
t
ions ions
ions ions
ions continued
Note: Not all menus are available for every input source.