NEC M260X Projector User Manual


 
60
4. Using the Viewer
Projecting images stored in a USB memory device
ThissectionexplainsthebasicoperationoftheViewer.
TheexplanationprovidestheoperationalprocedurewhentheViewertoolbar(page64)issettothefactoryde-
fault.
-StartingtheViewer .......................................................................below
-RemovingtheUSBmemoryfromtheprojector ....................... page62
-ExitingtheViewer..................................................................... page62
Preparation:BeforestartingtheViewer,storeimagestotheUSBmemoryusingyourcomputer.
WIRELESS
WIRELESS
Starting the Viewer
1. Turnontheprojector.(page16)
2. InserttheUSBmemoryintotheUSBportoftheprojec-
tor.
• DonotremovetheUSBmemoryfromtheprojectorwhile
it’s LED flashes. Doing so may corrupt the data.
3. PresstheSOURCEbuttonontheprojectorcabinet.
The Viewer start screen will be displayed.
• PresstheVIEWERbuttonontheremotecontrol.