Filter
Top Products
Troubleshooting 8-35
Starting the Off-line Maintenance Utility
The Off-line Maintenance Utility may be started in the following ways.
From the CD-ROM
Set the NEC EXPRESSBUILDER CD-ROM in the CD-ROM drive and reboot the
system.
After the menu is displayed on the screen, select "Tools" - "Off-line Maintenance Utility".
The Off-line Maintenance Utility program starts from the CD-ROM.
From the floppy disk
Set the Off-line Maintenance Utility Bootable FD in the floppy disk drive and reboot the
system.
The Off-line Maintenance Utility program starts from the boot disk.
The Off-line Maintenance Utility Bootable FD is created by selecting "Tools" - "Create
Support FD" on the NEC EXPRESSBUILDER.
Manual start (by pressing F4)
When the Off-line Maintenance Utility is installed, press F4 while the start-up screen of
the server is on screen. The Off-line Maintenance Utility starts from the hard disk drive.