Filter
Top Products
32
4. Using Menus
4-2. Table of adjustment menus
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.
Main menu
Title Select
Configuration
(Title Setup)
Information
Submenu
"Title Memory Name"
TEST Pattern
Lamp Setup
(Setup)
(Installation)
(Memory)
Macro Key
Lamp
Macro Key
Usage
Error Code
Version
IP Address
MMS Status
Adjust
Feedback
Douser Mode
Turret
Ext. MMS Link
Panel Key Lock
FactoryDefault
Image Orient
Lens Center
MMS Select
Baudrate
Date/Time
(New Bulb)
(Bulb Warning)
(New Lamp House)
Bulb Alignment
Lamp
Lens
Macro Key No.1-8
Output
Bulb Type [A]
Bulb Type [W]
Bulb Type [H]
Macro Key No.1-8
System
MMS(Built-in)
System
Cinema
PC Card
Description
Selects the title of the signal to be projected.
Selects the test pattern to be projected.
Adjusts lamp brightness.
Sets the lamp brightness constant mode that uses a
brightness sensor.
Selects whether to use the douser (screen mute) when
switching signals.
Controls the turret mounted with an anamorphic lens.
Sets whether to connect an external multi-media switcher (MMS).
Locks the buttons on the projector's control panel so that
they cannot be operated.
Returns the settings to their default values (only macro keys
and titles, or all settings).
Selects the projection method (front/rear).
Moves the lens shift position to the center.
Selects the multi-media switcher (MMS) to connect.
Sets the PC control connector (RS-232C) data transmission
speed (bps).
Sets the date and time on the projector.
Resets the lamp bulb usage time and selects or edits new
entries (only when the projector is in standby mode).
Sets the lamp bulb warning time (only when the projector is
in standby mode).
Resets the lamp house usage time, and makes settings or
selects modes (only when the projector is in standby mode).
Sets the lamp bulb alignment.
Saves the current lamp setting.
Saves the current lens setting.
Sets the titles to be assigned to the macro keys of 1 to 8.
Displays the lamp output setting.
Displays the registered name and the maximum/minimum
current setting of the currently used lamp bulb.
Displays the registered name and the lamp rated output (kW)
of the currently used lamp bulb.
Displays the registered name and the lamp bulb warning time
(Bulb Warning Time) setting of the currently used lamp bulb.
Displays the titles assigned to the macro keys of 1 to 8.
Displays the usage times of the projector, lamp bulb, lamp
house and bulb warning.
Displays the currently occurring error.
Displays the version of the projector head. (BIOS, Firmware,
Data, and Serial No.)
Displays the version of the built-in multi-media switcher (MMS).
(BIOS, Firmware, Data, FPGA, and Serial No.)
Displays the SYSTEM IP address.
Displays the CINEMA IP address.
To display the IP address when a wireless LAN card is set.
Displays the link-status of the connected multi-media
switcher (MMS).
Reference
page
33
33
34
34
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
34
35
35
35
35
35
36
36
36
37
37
37
37
37