Filter
Top Products
4
Lamp Caution: Please read before operation
• Due to the lamp being sealed in a pressurized environment,
there is a small risk of explosion, if not operated correctly.
There is minimal risk involved, if the unit is in proper working
order, but if damaged or operated beyond the recommended
hours, the risk of explosion increases. Please note that there
is a warning system built in, that displays following message
when you reach a preset operating time “Bulb Over Time”.
When you see this message please contact your dealer for a
replacement.
If the lamp does explode, smoke will be discharged from
the vents located on the back of the unit. Do not stand in
front of the vents during the operation. This smoke is
comprised of glass in particulate form and Xenon gas,
and will not cause harm if kept out of your eyes. If your
eyes have been exposed to this gas, please flush your
eyes out with water immediately and seek immediate
medical attention. Do not rub your eyes! This could cause
serious injury.
• Consult qualified service personnel for cleaning the inside
of the projector or lamp replacement. Do not try to clean
the inside of the projector or replace the lamp.
• Never unplug the projector from the outlet under the
following conditions. Doing so can damage the
projector.
- While projecting images
- While cooling after the projector has been turned off.
(The POWER indicator blinks in orange while the fan is
rotating, and the LCD screen is displaying “Cooling...”.
The cooling fan continues to work for 5 minutes.)
For questions relating to unclear points or repairs
Contact your dealer or the following support branches for questions
relating to unclear points, malfunctions and repairs of the product.
In Europe
NEC Europe, Ltd. / European Technical Centre
Address: Unit G, Stafford Park 12, Telford TF3 3BJ, U.K.
Telephone: +44 1952 237000
Fax Line: +44 1952 237006
In North America
NEC Corporation of America
Digital Cinema Division
Address : 4111 West Alameda Avenue Suite 412 Burbank,
CA 91505
Telephone : 818 557 2500
*If the above line is busy, please dial as below ;
Telephone : 866 632 6431
Important Information