NEC NP305G Projector User Manual


  Open as PDF
of 114
 
26
3. Projecting an Image (Basic Operation)
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.
1 Turning on the Projector
NOTE:
• Theprojectorhastwopowerswitches:amainpowerswitchanda (POWER)button(POWERONandOFFontheremote
control).
• Whenplugginginorunpluggingthesuppliedpowercable,makesurethatthemainpowerswitchispushedtotheoff() posi-
tion.Failuretodosomaycausedamagetotheprojector.
1. Remove the lens cap
 • Donotremovethelenscapbypullingonthestring.Doing
so can cause mechanical damage to the part around the
lens.
2. To turn on the main power to the projector, press the
Main Power switch to the on position ( I ).
The projector will go into standby mode. When in standby
mode, the POWER indicator will light orange and the STA-
TUS indicator will light green when [NORMAL] is selected
for [STANDBY MODE].
See the Power Indicator section.(→ page 87)
FO
C
US
F
OC
US
STATUS
LAMP
AUTO ADJ. SOURCE
 previous next