NEC NP305G Projector User Manual


 
27
3. Projecting an Image (Basic Operation)
3. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control for 1
second.
The POWER indicator will turn to green and the projector
will become ready to use.
NOTE: When the projector is turned on, it may take some time
before the lamp light becomes bright.
TIP:
• WhentheSTATUSindicatorlightsorange,itmeansthatthe
[CONTROLPANELLOCK]isturnedon.( page 72)
• Whenthemessage“Projectorislocked!Enteryourpassword.”
isdisplayed,itmeansthatthe[SECURITY]isturnedon.(
page 43)
After you turn on your projector, ensure that the computer
or video source is turned on and that your lens cap is
removed.
NOTE:Whennosignalisavailable,theNEClogo,blue(default),or
black screen will be displayed. When the projector displays the NEC
logo, a blue or black screen, the projector will automatically switch
to[ECOMODE].
TheprojectorwillreturnECOMODEtoitsprevioussettingoncean
active signal is connected.
STATUS
LAMP
AUTO ADJ.SOURCE
MENU
UP
MAGNIFY PAGE
OFF
POWER
ON
AV-MUTE
DOWN
STATUS
LAMP
AUTO ADJ.SOURCE
Standby Blinking PowerOn
Steady orange light
Blinking green
light
Steady green
light
( page 87)