NEC NP-VE281 Projector User Manual


  Open as PDF
of 88
 
24
3. Projecting an Image (Basic Operation)
Adjusting with the remote control
1. Press the KEYSTONE button.
The Keystone bar will be displayed.
2. Use the or button to correct the keystone distortion.
Adjust so that the right and left sides are parallel.
3. Press the ENTER button.
NOTE:
• Themaximumrangeofverticalkeystonecorrectionis+/−40degrees.Thismaximumrangemaybesmallerdependingonthe
signaloraspectratiosetting.TheKeystonecorrectionrangewillalsobesmallerwhen3Dmodeisenabled.
• Therangeofkeystonecorrectionisnotthemaximumtiltangleofprojector.
• Theleftandright(horizontal)keystonecorrectionisnotavailable.
 previous next