NEC NP-VE281 Projector User Manual


  Open as PDF
of 88
 
26
3. Projecting an Image (Basic Operation)
Turning off the Projector
To turn off the projector:
1. First, press the (POWER) button on the projector
cabinet or the POWER OFF button on the remote
control.
The [POWER OFF / ARE YOU SURE? /CARBON
SAVINGS- SESSION X.XXX[g-CO2]] message will appear.
2. Secondly, press the (POWER) button on the
projector cabinet, or the ENTER button or the POWER
OFF button on the remote control.
The lamp will turn off and the projector will go into standby
mode. When in standby mode, the POWER indicator will
light orange and the STATUS indicator will light green when
[NETWORK STANDBY] is selected for [STANDBY MODE].
3. Finally, unplug the power cord.
The POWER indicator will go out.
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during normal
projector operation or during cooling fan operation. Use caution when picking up the projector.
Power On Standby
Steady green light Steady orange light
NOTE:
• Donotturnoffthepowerfor60secondsimmediatelyafterturningitonanddisplayinganimage.
• DonotdisconnecttheACpowersupplytotheprojectorwithin10secondsofmakingadjustmentorsettingchangesandclosing
themenu.Doingsocancauselossofadjustmentsandsettings.
 previous next