Filter
Top Products
CHAPTER 3 BASICOPERATIONS AND VARIOUS EXPLANATIONS
– 88 –
NWA-008869-001 Rev.1.0
atch3001.fm
NOTE: If no startup program is set with the boot entry command, the program to be displayed at the
top with the show flash command will be loaded.
At a restart with the reload command
Almost the same operations as those performed at startup by turning ON the power switch are performed,
except that self-diagnosis is not performed and the (2) and subsequent steps are performed.
All of the running config and statistical and other information, that existed before the restart will be lost.
IX1000 Series Router POST (Power On Self Test)
DRAM TEST 1 : Pass
DRAM TEST 2 : Pass
NVRAM TEST : Pass
CPU TEST : Pass
PLD TEST : Pass
LAN1 TEST : Pass
LAN2 TEST : Pass
VOLTAGE : 3.199V Pass
TEMPERATURE : +36.0degC Pass
Copyright (C) NEC Corporation 2001. All rights reserved.
Copyright (C) 1985 − 1998 OpenROUTE Networks, Inc.
Copyright (C) 1995 − 1998 Eric Young
Loading using Flash Load Image "ix1000 − ms − 4.0.5.ldc"
------------------
Starting at 20000
NEC Portable Internetwork Core Operating System Software
Copyright Notices :
Copyright (C) NEC Corporation 2001 − 2002. All rights reserved.
Copyright 1985 − 1998 by OpenROUTE Networks, Inc., All rights reserved
Copyright 1984 − 1987, 1989 by J. Noel Chiappa
Copyright 1995 − 1998 by Eric Young
Router #
(3) (4)
Boot program
check and loading
(5)
Command prompt
display
(1)
Self − diagnosis
SETTING DATA AND PROGRAM FILES