Filter
Top Products
8
1. Introduction
ᕤ Part Names of the Remote Control
1. Infrared Transmitter
Direct the remote control toward the remote sensor
on the projector cabinet.
2. POWER ON Button
When the main power is on, you can use this button
to turn your projector on.
NOTE: To turn on the projector, press and hold the POWER
ON button for a minimum of two seconds.
3. POWER OFF Button
You can use this button to turn your projector off.
NOTE: To turn off the projector, press the POWER OFF
button twice.
4. MAGNIFY (+) (–) Button
Use this button to adjust the image size up to 400%.
The image is magnified about the center of the screen.
See page 27.
5. PIC-MUTE Button
This button turns off the image and sound for a short
period of time. Press again to restore the image and
sound.
VOLUME
S-VIDEO
VIDEO
L-CLICK
ENTER
EXIT
MENU
UP
MAGNIFY PAGE
OFF
POWER
ON
PIC-MUTE
DOWN
MOUSE
R-CLICK
AUTO ADJ.COMPUTER
ASPECT HELP
FREEZEPICTURE
1
2
1
3
4
7
6
9
2
8
10
11
13
14
12
20
21
19
16
15
18
5
17
6. PAGE UP/DOWN Button
Not available on this model.
7. MENU Button
Displays the menu for various settings and adjust-
ments.
8. SELECT ̆̄̇̈ Button
̆̄ : Use these buttons to select the menu of the
item you wish to adjust.
̇̈ : Use these buttons to change the level of a se-
lected menu item. A press of the ̈ button ex-
ecutes the selection.
When an image is magnified, the SELECT ̆̄̇̈
button moves the image. See page 27.
9. ENTER Button
Use this button to enter your menu selection. It works
the same way as the ENTER button on the cabinet.
See page 6.
10. EXIT Button
It works the same way as the EXIT button on the cabi-
net. See page 6.
11. MOUSE L-CLICK Button
Not available on this model.
12. MOUSE R-CLICK Button
Not available on this model.
13. VIDEO Button
Press this button to select a video source from a VCR,
DVD player, laser disc player or document camera.
14. S-VIDEO Button
Press this button to select an S-Video source from a
VCR.
15. COMPUTER 1 Button
Press this button to select COMPUTER (or Compo-
nent) input.
COMPUTER 2 Button
Not available on this model.
16. AUTO ADJ. Button
Use this button to adjust an RGB source for an opti-
mal picture.
See page 25.
17. VOLUME (+)(–) Button
Press (+) to increase the volume and (–) to decrease
it.