Filter
Top Products
12 NEC PowerMate eco Getting Started Guide
Secure the cover by pressing in on all of the side and bottom tabbed areas as shown in
the following figure until they click in place.
Securing the rear cover
8.
Position the system on its base. Reconnect peripheral devices and the AC adapter.
Removing a Memory Module
If you are replacing a memory module, remove the installed memory module as follows.
Before handling any internal components, discharge static electricity
from yourself by touching a nearby unpainted metal surface.
1.
Press the locking tabs away from the sides of the module until the module pops up at an
angle.
2.
Pull the memory module out of the slot along the angle and store it in a static-free bag.
Removing the memory module
A
– Locking tab (1 of 2)