Filter
Top Products
E – 40
Source Information
Displays the status of the current signal. This dialog box has three pages.
Projector Information
Displays the information for your projector such as lamp usage, serial
number and version number etc..
Link Mode
Displaying Current Status of Link Mode
When selecting the tab "Page 4 ", you will get the following dialog
box.
Master ID ....................Indicates the Master projector
Status .........................Indicates the status of the master projector
Connected PJ ..............Indicates number of connected slave projectors
Slave No .....................Indicates serial number of the slave projector
ID ................................Indicates ID of a slave projector
Status .........................Indicates the status of the slave projector
Page buttons
ᮤ
ᮣ
.......Turns pages. One screen displays information of 3
projectors only. Information of a maximum of 16
projectors can be displayed using these page but-
tons.
Reconnect button .......Confirms connection of all linked projectors
Status items:
Running ......................The projector is now working
Cooling Lamp .............The fan is now cooling the lamp
Standby ......................The projector is in stand-by
Communication Error .A communication error has occurred
Connecting..................The projector is now verifying for connection
Error Standby .............An error caused the projector to enter the stand-by
mode.
Test Pattern
Press to display the test pattern. Pressing this button sequentially se-
lects five test patterns.
Contents
Provides an online help about how to use the menus. An underlined link
means that you can move to an adjustment item directly.
Selecting the underlined link and pressing ENTER moves to the corre-
sponding adjustment item.
NOTE: The Help Menu may not be displayed correctly when a UXGA signal is
displayed.
Help
[Page 4]