Filter
Top Products
E–15
Switching Operation Mode between Computer and Projector
The SELECT, ENTER, and CANCEL buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
• When any one of the POWER ON, OFF, MENU, HELP, or MAGNIFY button is pressed, the PJ button lights red to indicate that
you are in the Projector mode, which allows the projector menu operation using the SELECT, ENTER or CANCEL buttons.
• If no buttons are pressed within 10 seconds, the PJ button’s light goes out to indicate that you are in the Computer mode. To
enable the projector menu operation again, press the PJ button to light red.
• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode
(not lit).
[Computer mode]
OFF ON
VIDEO
S-VIDEO
RGB
POWER
PJ
MAGNIFY
SELECT
E
M
N
U
T
E
R
N
E
N
C
E
A
C
L
AUTO ADJ.
FREEZE PIC-MUTE
PICTURE
VOLUME
HELP
ASPECT
Works as a mouse for your
computer.
Works as a right-click but-
ton for your computer.
Works as a left-click button
for your computer.
Not Iit
OFF ON
VIDEO
S-VIDEO
RGB
POWER
MAGNIFY
SELECT
E
M
N
U
T
E
R
N
E
N
C
E
A
C
L
AUTO ADJ.
FREEZE PIC-MUTE
PICTURE
PJ
VOLUME
HELP
ASPECT
Works as the Select button
on the projector.
Works as the Cancel button
on the projector.
Works as the Enter button
on the projector.
[Projector mode]
Lit red
During Computer mode:
During Computer mode by pressing the ENTER button for 1.5 seconds or more then releasing, the drag mode is set and the drag
operation can be performed simply by pressing the SELECT (
, , , ) / (mouse) button.To cancel the drag mode,press the
ENTER (left click) button again or press the CANCEL (right click) button.
Note on Operating Your PC with the Remote Control
If no button operation is made for 60 seconds or more, the SELECT (
, , , ) /(mouse) button operations will cease to operate.
This is not a malfunction, rather it is a feature used to prolong battery power.
To cancel this feature, press the CANCEL button.