NEC VT650 Projector User Manual


 
E20
RGB
INPUT
OUTPUT
AUDIO
IN
INOUT
OUT
PC-CONTROL S-VIDEO
VIDEO
RGB INPUT
AUDIO
Connecting Your PC
IBM VGA or Compatibles
(Notebook type)
Signal cable (supplied)
To mini D-Sub 15-pin connector on the projector. It is
recommended that you use a commercially available dis-
tribution amplifier if connecting a signal cable longer than
the supplied one.
IBM VGA or Compatibles
(Desktop type)
Audio cable
(not supplied)
Connecting your PC to your VT650 projector will enable you to project your computers screen image for an impressive presentation.
To connect to a PC, simply:
1. Turn off the power to your projector and computer.
2. Use the supplied signal cable to connect your PC to the projector.
3. Turn on the projector and the computer.
4. If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer youve
connected to the projector.