Filter
Top Products
E–23
RGB
INPUT
OUTPUT
AUDIO
IN
IN
OUT
OUT
PC-CONTROL
S-VIDEO VIDEO
RGB INPUT
R
L
R
L
Y
Cb
Cr
You can connect your projector to a DVD player with component outputs or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAן3)
and the optional 15-pin-to-RCA (female) ן3 cable to connect your DVD player to the RGB INPUT connector on the projector.
For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite
VIDEO output of the DVD player to the Video Input of the projector.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements,
Connecting Your DVD Player
Optional 15-pin-to-RCA (female) ן3 cable
(ADP-CV1)
Audio cable
(not supplied)
DVD player
Audio Equipment
Component video cable RCAן3
(not supplied)
White
Red
Green
Blue
White
Red
Green
Green
Blue
Blue
Red
Red
Red