Filter
Top Products
The specifications and information regarding the products in this manual
are subject to change without notice. All statements, information, and
recommendations in this manual are believed to be accurate but are
presented without warranty of any kind, express or implied. Users must
take full responsibility for their application of any products.
The software license and limited warranty for the accompanying product
are set forth in the information packet that shipped with the product and
are incorporated herein by this reference. If you are unable to locate the
software license or limited warranty, contact your Net2Phone
representative for a copy.
The following information is for FCC compliance of Class A devices:
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio-
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case users will be required
to correct the interference at their own expense.
The following information is for FCC compliance of Class B devices:
The equipment described in this manual generates and may radiate
radio-frequency energy. If it is not installed in accordance with 's
installation instructions, it may cause interference with radio and
television reception. This equipment has been tested and found to
comply with the limits for a Class B digital device in accordance with the
specifications in part 15 of the FCC rules. These specifications are
designed to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference
will not occur in a particular installation.
Modifying the equipment without 's written authorization may result in
the equipment no longer complying with FCC requirements for Class A
or Class B digital devices. In that event, your right to use the equipment
may be limited by FCC regulations, and you may be required to correct
any interference to radio or television communications at your own
expense.
You can determine whether your equipment is causing interference by
turning it off. If the interference stops, it was probably caused by the
Net2Phone equipment or one of its peripheral devices. If the equipment
causes interference to radio or television reception, try to correct the
interference by using one or more of the following measures: