Filter
Top Products
Max 410/420/430 User’s Guide – Chapter 3
26
Figure 6 – HyperTerminal Window
To connect to the Max Web Manager, you will need to
enter at least an IP address and netmask.
To enter the Max’s IP parameters from this menu:
1. Type the number of the parameter you want to
enter or change.
2. At the Enter <parameter>: prompt, enter the
desired value.
For example:
a. Enter 1 at the menu prompt to change the IP
Address.
The
Enter IP Address prompt
appears (Figure 7).
b. At the prompt, enter the IP address you wish
to assign.
The Max confirms your entry. The confirmation
scrolls by quickly, so you need to scroll up to see
it.