Filter
Top Products
Max 410/420/430 User’s Guide – Appendix
75
Make sure the RJ-45 LAN cable is connected
securely to your Max 410/420/430 and LAN,
hub, or router.
Make sure that all network ports, routers, or
hubs are live.
I set DHCP to ON, but my Max 410/420/430 cannot
obtain correct network settings.
Make sure your network supports DHCP.
Make sure your RJ-45 LAN cable is securely
connected to both the Max 410/420/430 and to
the LAN, hub, or router.
Make sure that all network ports, routers, or
hubs are live.
My analog phone does not have a period; how do I
enter the periods in my IP address and netmask?
Use the star key (*) in place of the periods.
When I enter a static IP Address into my Max
410/420/430 and restart the unit, the IP Address I
entered is not saved.
Make sure DHCP is set to OFF.
If you entered the IP address through an
analog phone, make sure you press the # key
before hanging up.
I changed the login password on my Max 410/420/430
and I forgot the new password.
Log in as manager or sysadm. Note that the
default password for both is n2p.
When I attempt to access the Max Web Manager, I am
prompted for a user name and password. But when I
enter them and press the OK button, the Password
page reappears.