NetComm HS800 Network Router User Manual


 
www.netcomm.com.au Rev. 1 - YML698
Page 10 HS800 User’s Guide
1-5 Three Button Printer
Figure 1-5 Three Button Thermal Printer
1-5-1 Changing the paper
If there is no paper, the Button A indicator will be flashing. To change the paper:
Step 1: Open the clear cover by pressing down the lever on the right hand side of the
printer.
Step 2: Remove the old roll.
Step 3: Insert the new roll so that the paper edge is facing away from the front of the
printer.
Step 4: Close the clear cover.
Step 5: Press and release Button A to feed the paper through.
1-5-2 Test Print
To print a test page on the Printer:
Step 1: Turn the power off.
Step 2: Hold down Button A and turn the power on.
Step 3: Release Button A and the printer will print a test page.
Button A
Button B
Button C