Filter
Top Products
Rev. 1 - YML698 www.netcomm.com.au
HS800 User’s Guide Page 53
4-2 HS800 Wireless Gateway – Remote Administration
4-2-1 Connecting to HS800 on Internal LAN (within Office / Site)
Scenario:
The HS800 is connected to a LAN via an Ethernet port as a DHCP client (getting IP,
Gateway and DNS from your DHCP server). Note: you can also set it up with a Static IP if
necessary.
You have a connection to the Internet and you can surf using devices that are connected to
the LAN side of the HS800 (default IP’s in the 10.0.0.x range)
You would like to specify certain IP addresses that can administer the HS800 from both the
LAN and WAN side.
Login to http://10.0.0.1/ as the administrator and navigate to Advanced Setup / System and
scroll down to following section:
Click on Specify