Filter
Top Products
Rev. 1 - YML674 www.netcomm.com.au
NB1300Plus4 ADSL Modem Page 29
ADSL Gateway
Router - USB
ADSL Gateway Router - USB Configuration
Use this configuration if you:
■ Have been told to use Easy Config “ISP Profile 1, 2, 3, 5 or 6 ”, or
■ Were told by your ISP to use this Configuration with another Easy Config profile.
■ Wish to use the NB1300Plus4 with a computer that does not have an Ethernet socket. This
computer will use a Private IP address and will be protected from the Internet by the
NB1300Plus4 (via NAT).
■ Already use the NB1300Plus4 with an Ethernet network but wish to connect a Computer
that does not have an Ethernet socket. (You do not need to reconfigure the NB1300Plus4
please refer to the “Connecting your NB1300Plus4 via USB cable” section in this guide)
USB Gateway Configuration (Multiple public IPs to Multiple internal IPs) - If you do not
have an Ethernet port on your computer you can use your USB port like an Ethernet port to
connect to the NB1300Plus4. This "simulated" Ethernet port is only for connecting to the
NB1300Plus4 and is only available for Windows 98SE, Windows 2000, Windows XP and
machintosh OSX.. The NB1300Plus4 will log on to your ISP on behalf of your computer and it
will shield your computer from Internet attack by using NAT.