NetComm NB620W Network Router User Manual


 
NB620W Super-G Wireless Broadband Gateway User Guide YML725 Rev1
12 www.netcomm.com.au
Chapter 2 Configuring your ComputersChapter 2 Configuring your Computers
Chapter 2 Configuring your ComputersChapter 2 Configuring your Computers
Chapter 2 Configuring your Computers
2.1 Overview
The instructions in this chapter will help you configure each of your computers to be able to
communicate with the NB620W Gateway.
To do this, you need to configure your PC's network settings to obtain an address automati-
cally, so your PC can function as a DHCP client. Computers use IP address to communicate
with the Gateway and each other across a network, such as the Internet.
First, find out which Windows operating system your computer is running. You can find out
by right clicking My computer on your desktop (if you can not find it on the desktop, click the
Start button). Then choose contents in the menu, the system information tells you which
operating system you are using.
You may need to do this for each computer you are connecting to the Gateway.
The following pages tell you, step by step, how to configure your network settings based on
the type of Windows operating system you are using. Make sure that an Ethernet or wireless
adapter (also known as a network adapter) has been successfully installed in each PC you will
configure. Once you've configured your computers, continue to "Chapter 3: Configuring the
Wireless Gateway".