NetComm NB620W Network Router User Manual


 
NB620W Super-G Wireless Broadband Gateway User Guide YML725 Rev1
18 www.netcomm.com.au
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet
Protocol (TCP/IP), and click the Properties button.
4. Select Obtain an IP address automatically. Once the new window appears, click the OK
button. Click the OK button again to complete the PC configuration.
After you have obtained an IP address, please access the Gateway by typing http://192.168.1.1
to configure the Gateway. (If you have changed the route's IP address, please type http://<the
new IP address of the gateway>.)