Filter
Top Products
YML854 Rev1 NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4WnNB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
www.netcomm.com.au 71
Internet – Connections
To set WAN settings for each service, please open Advanced – Internet. This page allows you to edit, to
remove, or to add WAN settings.
If you click the Connect hyperlink under the PVC Name item, the system will connect to WAN automatically. If
the WAN connection is OK, you can check the detailed information directly.
You can add new PVC(s) by clicking the Add button, edit the settings for the present PVC by clicking in
the Edit column, or delete the existing PVC by pressing icon.
Adding a New One
To add a new WAN connection, please click the Add button. The following screen appears.
VPI (Virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255.
Please refer to the value that your ISP provides.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to
31 is reserved for well-known protocols). Please refer to the value that your ISP provides.