Filter
Top Products
www.netcomm.com.au Rev. 1 - YML668
Page 20 NP5400 11g Wireless Access Point User Guide
The IP Address Tab
The IP Address Tab displays IP settings options on this AP.
IP Address Mode: Select "Static" or "DHCP" mode. For "Static" mode, the IP
address settings are given by user. For "DHCP" mode, these
settings will be overridden by a DHCP server on your
network. The default setting is "Static"
Default IP Address: The static IP address you want to assign to the AP. The
default value is "192.168.1.100".
Default subnet mask: The subnet mask you want to assign for the AP. The default
value is "255.255.255.0".
Default gateway: The internet gateway you want to assign for the AP. The
default value is "192.168.1.1".
Access point name: With the name, the AP can be found easily via Wireless
Nevigator Utility. It can be the nickname assigned by the
adminstrator.
Note: Click button "Save" to store the settings. The settings will work after AP
automatically reboots.