Filter
Top Products
Rev. 1 - YML668 www.netcomm.com.au
NP5400 11g Wireless Access Point User Guide Page 21
The Admin Tab
The Admin Tab allows to change the device's system configurations.
Access point name: With this unque name, the AP can be found easily via
Wireless Nevigator Utility. It can be the nickname assigned
by the adminstrator.
User name: This is the name used for login into the AP's built Web User
Interface.
Administrator password: Please key the same password in both columns, then click
"Save" to validate the new password
Commands
Reboot access point: When any setting was changed, the AP MUST be reboot so
that the change can be confirmed.
Reset to factory defaults: This option will ERASE all the current settings, and return
back to the factory defaults.
Note: Click button "Save" to store the settings. The settings will work after AP
automatically reboots.
The Help Tab
The Help Tab displays the explanations of each setting shown in above seven tabs.Please click
those hyperlinks in right side, and then it will direct you the meaning of each setting.