NETGEAR DG834GT Network Router User Manual


 
Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
3-8 Connecting the Router to the Internet
August 2004
Figure 3-6: Connecting a computer to the DG834GT Super Wireless ADSL Router
Note: The DG834GT Super Wireless ADSL Router incorporates Auto Uplink
TM
technology.
Each Ethernet LAN port will automatically sense whether the cable plugged into the port
should have a 'normal' connection (for example, connecting to a computer) or an 'uplink'
connection (for example, connecting to a switch or hub). That port will then configure itself to
the correct configuration. This feature also eliminates the need to worry about crossover
cables, as Auto Uplink will accommodate either type of cable to make the right connection.
d. Connect the power adapter to the router and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the router.
The ADSL link light is solid green, indicating a link has been established to the
ADSL network.
e. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically. Verify the following:
The local lights are lit for any connected computers.
Note: For instructions on connecting computers to the DG834GT via wireless links, please
see Chapter 4, “Wireless Configuration”.
&RPSXWHU
0HONE
$3,
,INE
*DWHZD\
C